"QA/QC Engineer (Piping and Mechanical)" in Doha, Qatar; Industry: Engineering; Mechanical Or Industrial Engineering; Work Type: On-Site

 

Job Title: QA/QC Engineer (Piping and Mechanical)

• Location: Doha, Qatar
• Industry: Engineering; Mechanical Or Industrial Engineering
• Work Type: On-Site

Description:

Mselect is looking to hire a QA/QC Engineer (Piping and Mechanical) for a national oil and gas operator in Doha, Qatar. Candidates must have a minimum of 15 years of relevant oil and gas industry experience in a similar role. Fluency in English is a must.

Key Responsibilities:

• Support Contractor to identify and submit the QA/QC documents (ITPs, QCPs, Welding / NDT / HT / Painting and other test procedures, MARs etc.,) in line with Construction program, their timely review and approval.
• Assist functional supervisor in review / approval of relevant QMS, Engg., & Procurement documents, implementation of Quality Programs, and resolution of discipline matters escalated to the Project Management.
• Ensure Implementation of Project QA/QC requirements at project site and suppliers / sub-contractor’s works complying to project specification and other technical requirements.
• Organize Pre-Activity Review meetings, attend Quality Walk through and QA/QC Weekly meetings.
• Undertake surveillance of on-site and off-site Structural / Piping / Pipeline shop and Field fabrication / Equipment Erection and associated inspection & testing activities, identify potential or actual non-conformances and direct contractor in taking necessary Correction, corrective and preventive actions.
• Initiate or ensure initiation of NCR’s for the recurrent surveillance observations and Non-Conformalities and coordinate / follow-up for RCA / Correction / Corrective /Preventive action proposals and timely close out.
• Monitor the progressive compilation of Material Test Certificates and Construction Records and their traceability.
• Monitor and verify the implementation of Preservation Management System.
• Ensure the Contractors maintain, update, and publish the IMTE Registers on regular basis and calibration records maintained.
• Ensure appropriate Systems / Processes / Procedures / Computer data base established by Contractor to maintain the Inspection and Test status during pre- fabrication, field erection, testing and statistical analysis of the data.
• Monitor the KPIs, Special processes and personnel performance.
• Participate in Project QHSE audits and Pre-Qualification Audits of Vend.rs / Suppliers / Sub-Contractors. Conduct ITP / QCP / MS / Process / Activity level compliance audits / Checks.
• Monitor Contactor/Sub-Contractor/Third party inspectors & Engineers and Subordinates, performance, provides necessary support / guidance and reports to functional supervisor.
• Implement and enforce the elements of our client’s Quality Management System requirements applicable to your function.
• Exposed to Construction Site and Prevailing Climatic Conditions at least 50% of time.
• Ensure own safety and the safety of others who may be affected by our client’s business, whether the activity is under direct control or not

Requirements

• Bachelor’s degree in mechanical engineering (or Equivalent) from a recognized university.
• IRCA Certified QMS Lead Auditor.
• Welding Inspector Certification (CSWIP 3.1 / AWS-CWI), Painting Inspector Certification (BGAS Grade-2 / NACE Level-2) and NDT Leve-2 Certification in RT, MT, UT and PT (ASNT/ACCP) is a must. Equivalent International Certifications acceptable.
• Having IIW-Welding Engineer / NDT level-3 and Certification in advanced NDT (PAUT, TOFD, AutoUT etc.,) will be an advantage.
• Professional membership / affiliations with recognized chartered or other professional institutions like ASNT / AWS / TWI / NACE / ASQ-CMQ&OE, MCQI-CQP or similar is desirable.
• 15 years’ experience in the construction of major Green field or Brown-field Process Plants (Refinery, NGL / LNG Plants, Petrochemical complex or similar) in Oil & Gas industry.
• Worked with major EPIC Contractors / End User in similar position in major projects with overall responsibility for the Quality of Piping / Mechanical discipline Construction and Commissioning activities. Sound working knowledge on QA/QC aspects, testing requirements and acceptance criteria related various Piping systems and Rotating / Stating Equipment and managing overall discipline’s QA/QC aspects in major Oil and Gas Projects.
• Good knowledge in understanding and application of international Codes, Standards and practices relevant to the job function (ASME, TEMA, ASTM, API, ISO, BS EN, NACE, IOGP, Shell DEP, MESC spec etc.)
• Ability to work well and effectively communicate with contractor / Third Party /End user personnel and colleagues at all levels in multidisciplinary, and multicultural environment.
• Hands on experience in preparation, review and approval of Quality Plans / ITPs / QCPs / MARs / Welding, NDT, HT, Painting and other test procedures; undertaking Inspection / testing activities related to Structural / Piping / Pipelines Pre-fabrication and miscellaneous Static & Rotating Equipment (Pressure Vessels / Exchangers / Tanks / Pumps / Compressors / Package Equipment etc.,) during Field Erection / installation, Testing, Pre-Commissioning and Commissioning activities.
• Experienced in managing the team of discipline inspectors, coordinating respective inspection & testing activities, establishing, and monitoring KPI in respective discipline.
• Experienced in development or implementation of Quality Surveillance Program, Completion Management System (CMS) and associate Inspection & Test Records (ITRs), Technical Integrity Verification (TIV), Flawless Project Delivery (FPD), Project Quality Health Check (PQHC) Program.
• Experienced in implementing and conducting Pre-Qualification / QMS / Quality and technical compliance checks and audits, Quality Walk through of EPIC organizations and project activities.
• Requires good knowledge of project features & Specialties with the ability to resolve highly complex QA/QC related issues and disputes arising from incorrect and disparate interpretations of Project technical requirements and Scope of work, by various parties involved in the project, including external authorities.

*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.

Interested with this job 👉 APPLY HERE

"QC Inspector Piping (Brownfield)" in Doha, Qatar; Industry: Engineering; Oil & Energy; Work Type: On-Site; Full-time

 

Job Title: QC Inspector Piping (Brownfield)

• Location: Doha, Qatar
• Industry: Engineering; Oil & Energy
• Work Type: On-Site; Full-time

Description:

Mselect is looking to hire a QC Inspector Piping (Brownfield) for a national oil and gas operator in Doha, Qatar. Candidates must have a minimum of 10 years’ experience for graduate engineers in similar positions in the Oil & Gas sector Experience, in GCC is desirable. Fluency in English is a must.

Key Responsibilities:

• Implementing the elements of the client’s management system applicable to your function
• Your safety and the safety of others who may be affected by the client’s business, whether the activity is under your direct control and proactively participate in all safety matters affecting the construction of the project
• Preventing pollution to the environment, either by you or by others in the project
• Co-ordinating/attending the inspection, tests and punch listing on behalf of the client
• Undertake familiarisation with Project and discipline-specific inspection documentation to ensure understanding of contract requirements
• Implement quality inspection procedures on construction activities, suppliers, and sub-contractors to ensure compliance with project specification
• Ensure that the documentation generated by the contractor for inspections, tests, surveillance and surveys meets the requirements of the Project Quality Plan, ITPs and project requirement
• Ensure Completion of relevant forms and reports on inspections and tests undertaken by the contractor and maintenance of inspection records
• Communicating effectively with the contractor, third parties and end users at your level
• Ensuring that all equipment used for measuring and testing is in calibration and such records are available
• Perform Surveillance of project site construction activities to identify problems and potential or actual non-conformances and to assist in proposing corrective and preventive actions
• Liaise with other Field Supervisors and Contractor to be aware of planned and completed construction works to ensure NDE is planned and performed
• Assist Sr QA/QC Engineer in the review/approval of Contractor QA/QC documents such as QCPs, ITPs, WPS/PQRs/Special Processes/Personnel qualifications, Material Approval Requests, MRBs, Project Dossiers etc,
• Monitor/Witness Contractor’s fabrication, installation, inspection and testing activities related to the Structural Steel, Process Piping, tanks and heaters, including internals installation and associated preceding and succeeding interface activities
• Witness/verify all inspection and testing activities related to the Welding, NDT, PWHT, Hardness testing, Alloy Verification, painting etc, starting from the procedures/personnel qualification till the respective systems hydro testing and ensure compliance with the project requirements
• Closely monitor the performance of special processes and personnel, weld Repairs/NDT status etc, and Controls exercised by the contractor and appraise Sr QA/QC engineer in case of any concerns
• Participate in the receiving inspection of project permanent materials and verification of associated documentation for traceability of Piping bulk materials, Consumables like welding electrodes/filler wires/gases, Painting/wrapping materials etc,
• Follow-up on Corrective Actions to close out non-conformances
• Monitor trends of non-compliance to client requirements and feedback on the status of the Contractor’s performance
• Initiate Surveillance/NCRs for SR QA/QC Engineer’s approval
• Maintaining relevant QA/QC documents/records

Requirements:

• Mechanical Engineering degree and/or diploma with experience in Quality Control in multi- discipline construction environment Preferably having formal training in QC and membership with recognised charted or other professional institution
• CSWIP 32/AWS Sr Welding Inspector, BGAS GRADE 2 or NACE LEVEL 2 and ASNT NDT Level-II Certification is a must, other equivalent certifications provided by internationally recognized organizations can be accepted
• Have 10 years’ experience as a graduate engineer and 15 years’ experience as a diploma holder in similar positions in the Oil & Gas sector Experience in GCC is desirable
• Candidate should have hands-on working experience related to CRA Clad/Lined Pipeline/flow lines and/or the piping/equipment of exotic materials (DSS, SDSS, Ni, Cr etc,) welding inspection/testing
• Sound knowledge of international standards related to materials and mechanical construction such as API, ASME, ASTM, NACE, DIN, etc
• The candidate should have sound working knowledge of QC aspects and various testing requirements related to major oil & gas/petrochemical-focused construction projects
• Duties are normally complex and vary and require the ability to work well with contractor’s personnel and colleagues at all levels in a multidisciplinary, multicultural environment

*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.

Interested with this job 👉 APPLY HERE

"QC Inspector (Rotating & Static)" in Doha, Qatar; Industry: Engineering; Oil & Energy; Work Type: On-Site; Full-time

 

Job type: QC Inspector (Rotating & Static)

• Location: Doha, Qatar
• Industry: Engineering; Oil & Energy
• Work Type: On-Site; Full-time

Description

Mselect is looking to hire a QC Inspector (Rotating & Static) for a national oil and gas operator in Doha, Qatar. Candidates must have a minimum of 10-15 years of relevant oil and gas industry experience in a similar role. Fluency in English is a must.

Key Responsibilities

• Undertake familiarization with Project Specifications and function specific inspection documentation to ensure understanding of contract requirements.
• Implement quality inspection procedures on construction activities, suppliers, sub- contractor’s work to ensure compliance to project specification and other technical requirements.
• Closely follow the 90Days look ahead Schedule, daily work & RFI schedules, liaise with functional focal point and Contractor personnel to be aware of the planned and completed equipment assembly / erection / testing activities and undertake Quality surveillance / witnessing according to the approved ITPs.
• Verify the availability of latest and approved documents / drawings / Qualification ID Cards / Calibration Certificates, at the place where Welding / NDT / Painting
• Witness Qualification and Testing of various types of refractory and applicators, sign off the RFIs and Qualification records.
• Monitor the equipment receipt, Material receiving inspection, documents review and Storage / Preservation as per the manufacturer recommendations / approved procedures.
• Surveillance of On-site and Off-site fabrication / assembly, erection, and testing activities, to identify potential or actual non-conformances and to assist contractor in taking necessary Correction, corrective and preventive actions.
• Provide feedback to functional supervisor on recurring quality observations or lapses, and follow-up on Corrections and Corrective Actions to close-out the observations and NCRs.
• Ensure that equipment used for Inspection, measuring and testing having valid calibration as per approved project procedures.
• Assist functional supervisor in review and / or approval of Quality and Construction documentation, including Method Statements, JHAs, QCPs, inspection & test plans, and attend Quality Walkthroughs.
• Monitor the functioning and performance of Contactor / Sub-Contractor / Third party inspectors and provide necessary support / guidance, where improvement needed.
• Communicate effectively with the contractor, third parties and Construction team at your level.
• Implement and enforce the elements of our client’s Quality Management System requirements applicable to your function.
• Exposed to Construction Site and Prevailing Climatic Conditions at least 80% of time.
• Ensure own safety and the safety of others who may be affected by our client’s business, whether the activity is under direct control or not

Requirements

• Bachelor’s Degree or Diploma in Mechanical Engineering (or Equivalent).
• Having Sr. Welding Inspector Certification (CSWIP 3.2 / AWS-SCWI), Painting Inspector Certification (BGAS Grade-2 / NACE Level-2) and NDT Leve-2 Certification in RT, MT, UT and PT (ASNT/ACCP). API 510 / 653 / 580 / 963 or relevant API Inspector Certifications will be an advantage.
• Preferably having formal training in QA/QC functional aspects and QMS internal Auditor.
• 10 years’ experience for graduate engineers and 15 years’ experience for diploma holders in similar position in Oil & Gas sector. Experience in GCC is desirable.
• Sound working knowledge in Welding / NDT / Painting / Coating and associated Quality / Inspection / Testing requirements and acceptance criteria related to major oil & gas Process Plants construction.
• Familiar with international Codes, Standards and practices relevant to the job function (ASME, ASTM, API, AWS, ISO, BS EN, IOGP, Shell DEP, MESC spec etc.)
• Hands on experience in undertaking Inspection / testing activities related to Static Equipment (Columns & Vessels / HE / Coalescer/ Tanks / Boilers / Heaters / Flares Packages etc.,) and Rotating Equipment (Pumps, Compressors, AFCs, Mixers / Fans / Blowers etc.,) during Field Erection / installation, Testing, Pre-Commissioning and Commissioning.
• Well versed with the Installation, inspection and testing of various types of internals in Columns / Vessels.

*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.

Interested with this job 👉 APPLY HERE